Download Tecno POUVOIR 1 Firmware [Stock ROM] and Component Files

Are you looking to download Tecno POUVOIR 1 stock Firmware and the component files? Then you are in the right place.

Here, we will be providing you the download links to the component files for the TECNO POUVOIR 1. Not just the component files, but the stock ROM also referred to as Firmware as well. Please note that the stock firmware or ROM is the same ROM that came with the phone. It is different from a custom ROM.

If you own a Tecno POUVOIR 1 phone which seem to be bricked, flashing this file in, should fix it. If however, the phone seem not to be turning on, we already wrote on that here.

Download Tecno POUVOIR 1 LA6 Stock Firmware (ROM)

There are basically two TECNO POUVOIR 1 models. The download links provided below, are for those two models.

Download Tecno POUVOIR 1 firmware

Hence, be sure to download the component files and stock firmware for your particular phone model.

Tecno Pouvoir 1 LA6 (LA6-H8021AC-N-180105V79)

Tecno Pouvoir 1 LA6 (LA6-H8021AC-N-180319V91)

How To Flash / Unbrick Tecno POUVOIR 1 LA6 Firmware

Being able to flash in the POUVOIR 1 Fireware or stock ROM into the phone is quite easy. This is particularly needed in cases where the phone got bricked and you want to unbrick tecno Pouvoir 1 phone. On a post where we talked on fixing bricked Infinix note phone, we gave a guide to getting this done.

However, to give you a recap, you will need the SP flash tool to get this done. If that’s a bit too technical, there is the custom TECNO Download Agent (DA).

The process is actually simple. The linked infinix guide above, is comprehensive enough to put your through flashing the Stock ROM into the phone. Just be sure to use the appropriate rom file.

While are that, there are a few things to know before the flashing process;

  • Make sure the phone’s battery is charged. While a minimum of 50% is advised, it wouldn’t take you anything to have the battery charged to 100%.
  • Before the flashing process, make sure the phone is powered off or switched off.
  • You need a computer for this. Not just a computer, make sure MediaTek Preloader USB VCOM drivers is installed. The linked article guides you through the process of doing so.
  • Use a functional USB cable. To avoid a glitch in the flashing process, please use a USB cable that is still very functional and doesn’t disengage when slightly touched.

With all those in place, you should be fine.

Tecno POUVOIR 1 LA6 Key Specifications

Although this wouldn’t matter, we just want to be sure we are on same page. Make sure you are using the right phone.

Below are the key specifications of the Tecno POUVOIR 1 Android smart phone.

  • Model: Tecno Pouvoir 1 LA6
  • Colours: Black, Champagne, Blue, Green
  • Body Dimension: 154.5 x 77.2 x 8.8 mm
  • SIM Type: Nano Sim
  • SIM Count: Dual Sim
  • 2G: Yes
  • 3G: Yes
  • 4G: No
  • Platform: Android 7.0 Nougat (HiOS)
  • Processor: ARM Cortez-A7, 1300MHz
  • Cores: Quad core
  • Chipset: MediaTek MT6580
  • GPU: ARM Mali-400 MP2
  • Memory: 1GB
  • Built-in Storage: 16GB
  • Memory Card Support: Yes
  • Display: 5.5-inch, IPS LCD capacitive touchscreen, 720 X 1280 pixels
  • Rear Camera: 8MP
  • Rear Camera Features: -LED, Geo-tagging, touch focus, face detection, HDR, Panorama, continuous shooting
  • Front Camera: 5MP
  • WLAN: Wi-Fi 802.11 a/b/g/n
  • Wi-Fi Hotspot: Yes
  • Bluetooth: Yes, v4.0 with A2DP
  • USB Port: MicroUSB 2.0
  • FM Radio: Yes
  • Loudspeaker: Yes
  • 3.5mm Jack: Yes
  • Navigation: Yes, with A-GPS, GPS
  • Accelerometer: Yes
  • Battery: 5000 mAh Li-Polymer (non-Removable)

That’s it. That’s all there is to the tecno POUVOIR 1 firmware (stock ROM). Questions? Do not hesitate to ask.

About the author

Samuel Adeniyi

Samuel is a Tech Enthusiast who loves to explore everything that concerns Tech. Most of his explorations and guides, he shares via this platform. He studied Computer Science and prefers being simply called Sammy! 😉

1 Comment

Leave a Comment